Jump to content

Welcome to WatercoolingUK Community Forum
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. This message will be removed once you have signed in.
Login to Account Create an Account

PurE GaminG

PurE GaminG

Member Since 29 Feb 2012
Offline Last Active Mar 01 2012 03:15 AM

In Topic: Painting inside your pc case.

29 February 2012 - 07:46 PM

hi m8 just one question u mentioned that after our primer has cured and will be ready for the top coat.

Sand down the panel with the 400 grit with soapy water,wash with fresh water and dry down with cloth and leave for a few hour`s,when dry get your cotton cloth out and remove and dirt,you can buy a special tak rag that carbody shop`s use if you like but i use a old t-shirt.Now you are ready for the top coat

why do we need to sand down the primer, what was the point in primering it in the first place if we are going to sand it down a bit confused.