15 replies to this topic

[Dannyburnley]

Hey guys,


just looking for some help or suggestions


i am about to start my next project i am going to be using a TJ07 case..... and i want to do some mods and changes

on the front i want to put some white LEDS that looks like the front of audi's, and i also want to put a fill port at the top of the case....... there are other mods i want to do like change the back of the mother board tray..... my only problem...... i am a typical techie..... i can rubbish at DIY and doing work like this..... is there anyone out there willing to help me (obv i would be paying n stuff)


also what paints do i use to do the spraying? as i want to look like the pictures...... but i also want the inside of the case to be black...... i am also going to be having blue fin white LED fans in this case and black tubing.... in my res will be a blue coolant........

here are some pictures

audi lights


Front of the case

so i want it to be some soft of foam or mesh grill with these lights and then i was thinking of maybe adding some fins or something at the bottom but thats just an odd idea

and this is the top of the case were i would like to play a fill port

[Dannyburnley]

or is this a stupid idea and wont work???

[Squirrel-666]

that would work mate cant wait to see how it goes LED kits are good for what you want on the front.
btw still not seen you sign up lol

[Dannyburnley]

that would work mate cant wait to see how it goes LED kits are good for what you want on the front.
btw still not seen you sign up lol

i have just signed up mate LED Kits ok cool.... but could i have the leds that close??? i am also looking for someone to give me a hand with the actual modding and doing the steal work unless someone knows someone

[Squirrel-666]

whats your username on there mate i add you as a friend.

[Dannyburnley]

Dannyburnl

[Aaron]

Where do you live?

[Dannyburnley]

Where do you live?

Manchester

[Aaron]

Bring it to Huddersfield

I need something to do. No funds for mine atm

[andybones12]

i could help you out with lasering if you need a front cover plate made.
this is what i did for my case




Andy

[Dannyburnley]

Bring it to Huddersfield

I need something to do. No funds for mine atm

ohhhhhhh What would you be able to do ???

[Dannyburnley]

i could help you out with lasering if you need a front cover plate made.
this is what i did for my case




Andy

Andy EVERYTIME i see your case i get this butterfly feeling in my gut thinking HOW AMAZING your case is........ Bit sad maybe? i need a girlfreind

Anyway

That would be amazing how much would it cost me and how easy or what will i need to do to install it on the case? tbh the front of the case i am not sure what i want to do accept for the audi style lights..... but i was thinking of some sort of funky glowing white design if i draw up some ideas and get them to you? could you price them up and let me know? also would you be able to help with the mother board tray? as thats my main concern

[Aaron]

I dont know how the LED Audi style lights would look good on the front.....

You could always have them running down the side of the case with the weird swooping style of the lights from front to back...

What you wanting to do with mobo tray? Run inverted ATX?

[andybones12]

Thx for the kind words
pricewise is very cheap,for front panel.
The mobo,now i presume you will be wanting cutouts made for the cable routing and the CPU.
Something like this.

You should be capable of doing this.A drill,jigsaw and masking tape.Every modder needs to go through this initiation

Andy

[Dannyburnley]

Thx for the kind words
pricewise is very cheap,for front panel.
The mobo,now i presume you will be wanting cutouts made for the cable routing and the CPU.
Something like this.

You should be capable of doing this.A drill,jigsaw and masking tape.Every modder needs to go through this initiation

Andy

Andy i tried




But on a serious side yeah i am looking for something like that...... i really dont know if i trust my self to do the holes.... BUT the pit i am not happy about on this case is the to rear fans...... and thats what i want rid of and some funky design like that

[Dannyburnley]

I dont know how the LED Audi style lights would look good on the front.....

You could always have them running down the side of the case with the weird swooping style of the lights from front to back...

What you wanting to do with mobo tray? Run inverted ATX?

well for the mobo tray i just dont want to big holes i want some funk design were the back fans are.....


as for the lights i am not sure...... i want the front of the case to look smart and sharp.... and i think led lights would make it look awsome i need to have a propper think about it and get some designs drawn up